Which are the available Types of Weaving of Stainless Steel Filter Disc Mesh?

 

There are different weaving types applicable for metal filter discs.Let’s look at the commonly used weaving types for stainless steel filter disc: For more at  van điện từ khí nén

· Plain Weave

This is the most often used and simplest weaving type for stainless steel wire mesh filter discs.

Each warp wire passes one after another above and below the wires running diagonally across the mesh at right angles.

The weft and warp wires utilized have a similar diameter.

You can use plain weave stainless steel filter mesh in a broad variety of applications.

· Twilled Weave

Twilled Weave stainless steel filter disc mesh is manufactured by weaving every fill wire alternately above and below two warp wires.

Staggering on consecutive warp wires gives the pattern an impression of parallel diagonal lines.

This method of weaving stainless steel filter mesh facilitates the use of proportionally heavier wires in a specific mesh count than is achievable in plain weave.

Twilled weave stainless steel wire mesh filter disc has a wide application able to support immense loads and finer filtrations.

· Dutch Plain Weave

In this type of stainless steel filter disc mesh weaving, you use bigger warp wires than weft wires.

Dutch plain weave utilizes coarse mesh within the warp and comparatively smaller wire within the fill.

This weaving type has a greater strength coupled with very fine holes, mainly utilized as a filter cloth.

Dutch plain weave stainless steel filter disc has a high resistance to pressure load and high filtration level.

· Dutch Twilled Weave

This method of weaving filter disc mesh involves a blend of the features of the twilled weave and Dutch weave.

Fill wires are woven alternately above and below two warp wires creating a coarse mesh in one direction and a fine mesh in the other.

Dutch twilled weave has finer holes in comparison to the twilled weave and can support greater loads compared to the Dutch weave.

You can use this weaving type in applications that involve the filtering of heavy material.

· Reverse Weave

You produce this type of stainless steel filter disc weave by using a fine mesh having a comparatively smaller wire within the fill and a coarse mesh in the warp.

Reverse weave leads to greater strength with the metal filter disc having very fine holes.

The shape and location of the holes assist retention of particles and enhance filtration process.

· Five Heddle Weave

This type of weaving of stainless steel filter disc mesh is done by passing every fill wire alternately above and below five warp wires.

It is staggering of the pattern on consecutive warp wires, which give the image of parallel diagonal lines.

Five heddle weave facilitates the use of proportionally weighty wires in a specific mesh count than is achievable in other types of stainless steel filter mesh weave.

Filter disc mesh of this type has a variety of applications and can support greater loads. For more at  van bướm mặt bích